Draw a circuit. Cold solder. Paint and screen print circuits.
Bare Conductive’s Electric Paint provides a great platform for discovering, playing, repairing and designing with electronics.
Electric Paint can be used as both a liquid wire and a conductive adhesive. This handy material allows you to paint and screen print capacitive surfaces. Electric Paint is nontoxic, solvent free and water soluble.
This material is a great prototyping tool for makers of all ages. Once applied the paint dries quickly at room temperature, and can be removed with soap and water. Nontoxic, air-drying. Works great on many materials including paper, plastic, textiles and conventional electronics.
Works with: Electrical components, prototyping materials, PCBs, microcontrollers (Arduino, Raspberry Pi, MaKey MaKey, LilyPad, FLORA), e-textiles, and conductive thread. You can use a brush, a roller or even printmaking equipment! Please be aware that as Electric Paint dries the conductivity increases (and will continue to increase to a certain extent even after the paint “feels” dry), so if your project requires calibration, let the paint dry completely before testing it.
Directions: Apply with a brush, roller, or screen print. Leave to dry for 10 minutes, Electric Paint becomes conductive when completely dry.
It is important to let the paint dry for at least 10 minutes as Electric Paint only becomes conductive when completely dry.
Electric Paint is not meant for use on skin!
Electric Paint is not waterproof.